Mechanical Lab
In the Department of Mechanical Engineering, we are conscious of the importance of the role that mechanical engineering must play in areas such as energy and environmental systems, materials, transportation, robotics, manufacturing, information technology, biomechanics, health care, many of which are national priorities.
The Departments of Mechanical Engineering and Production Systems Engineering have been recently merged to better respond to the needs of the society. The integration produced a rich portfolio of research and academic activities in areas ranging from nano-scale processing to health-care robotics to supply chain management. As a result, the new department offers a diverse range of academic programs in 4 basic areas of specialization: Mechanical Systems Design, Materials and Manufacturing, Systems Control and Robotics, and Energy and Environment
CNC Lathe Machine
- Stepping Resolution 0.006 mm.
- Mechanical repeatability 0.007 mm.
- Spindle Speed 70 - 1500 RPM
- Chuck size 3”
- Travel: X = 4", Z = 1"
- Rapid Travel of 18 in/min.
- Universal Standard G-Code import.
- Plugs directly into computer printer port.
- lead screws with adjustable split bronze nuts on all axes.
Pneumatic Trainer Kit
TECHNICAL SPECIFICATIONS:
Pressure Gauge : 0-10 kg/cm2and 0-150 psi
Input Supply : 230 Volts AC 50 Hz
Single Acting Cylinder : Stroke length of 54 cm Diameter 32mm ,Port Size 1/8 inch
Operating pressure 0.5-8 kg/cm2
The board consists of the following built-in parts:
1) Double Acting Cylinder Stroke length of 100 cm
2) FRL 5/2 Hand Lever Valve
3) 3/2 Push Button Valve ,Diameter 32mm, Port Size 1/4 inch, Operating pressure 0.5-8 kg/cm2
4) Single solenoid valve,5/2 way valve, Direct Acting,
5) Pressure 1.5 -8 kgf/cm2,
6) Operating voltage 220 V AC at 50 Hz
7) Indicator Light Neon Light Red
8) Pilot Valve
9) Roller Lever Valve
10) Timer solenoid valve 5/2 way valve Direct Acting, Pressure 1.5 -8 kgf/cm 2, Operating voltage 220 V AC at 50 Hz, Timer Spec
11) On Timer 0 -10 Sec
12)Air filter, Regulator & Lubricator Unit (FRL Unit) 0-10 Kg/cm2
13)Hand Lever Operated Valves 5/2 way valve
14) Pilot operated valve 5/2 way valve
15)Port Size 1/4’’ BSP F Pressure 0-10 Bar
16) Roller lever valve 3/2 way valve
Design Spool Type
Port Size 1/4’’ BSP F
Flow / Speed control valve
Pressure 0-10 Bar
Hydraulic Trainer Kit
We are offering Hydraulic Trainer Kit with clear specification and detailed description. It helps to know the functioning of meter in and meter out. This kit enables the individuals to understand the Sequence Circuit and Quick Return Mechanism.
We are offering it as per the below specifications:
- Power Pack: 40 liters capacity (Oil Reservoir Tank – with Level Gauge)
- Motor: 1 H.P., 1400 rpm (Operating Pressure) of 50 Bar
- Pump (Gear Pump): 50 (pressure)
Actuators (Reciprocating):
- Double Acting Cylinders- 01: 40 mm x 100 mm stroke
- Single Acting Cylinders -01: 40 mm x 100 mm stroke
Valve:
- Direction Control Valve: 01 No.
- Flow Control Valve: 01 No.
- Sequencing Valves: 01 No.
- Press Reducing Valve: 01 No.
- Press Relief Valve: 01 No.
- Needle Valve: 01 No.
- Filter Regulator with Gauge: 01 No.
- Manifold Assembly: 01 No.
Instruments & Controls:
- Pressure Gauge: 0– 100 Bar(2 Nos)
- Starter: 3 phase L & T Make
Hoses:
-
Flexible Hoses to withstand 100 Bar Pressure Fitted with quick Couplings of 750mm – 6 Nos. & 1000mm – 6 No.
CNC Mill Trainer Machine
CNC milling machine used to PCB making, PCB drilling, front panel design, engraving.
Machine Features:
- Stepping Resolution 0.000125" (0.003mm)
- Mechanical repeatability 0.0005" (0.01mm)
- Spindle Speed 1100 - 11000 RPM
- Travel: X = 11" (300mm), Y = 5.50" (146mm), Z = 5" (153mm)
- Rapid Travel of 30 in/min.
- Universal Standard G-Code import.
- Plugs directly into computer printer port.
- Precision Mechanics.
- Box way Z-axis assembly with ground steel plate and tapered brass gib.
- Adjustable tapered brass gib on X-axis.
- Ground steel sliding ways with adjustable brass gib.
- Hard anodized aluminum table.
- 1/2" (12.7mm) 20 pitch Cr-Mo leadscrews with adjustable split bronze nuts on all axes.
- The system installed in a metallic enclosure with 6' height, openable front door, acrylic front and side cover and display panel.
- It has coolant system with removable collector.
- It has mechanical storage system on the bottom for Computer system, Controller, UPS and for Electrical wiring.
- The system supplied with PC with Intel Pentium-IV CPU @ 2.4 GHz, 512MB RAM, 52X DVD Writer, Optical Mouse, 15” TFT Monitor & Keyboard.
- Shipping weight: 120 Kg. (Approx.)
- Overall Dimensions: 51"x34"x70" (1295mm x 864mm x1778mm (WxDxH)
Micro Mill with New Powerful 1/4 HP spindle motor, Pulley set with drive belt, 1/8" (3mm) or 3/16" (4mm) or 1/4" (6mm) collect with collet closer, Electronic Chopper Driver Unit, Custom Win XP Mach 3 control software interface, 4th Axis Amplifier and Port Included, Input/Output Port Included, 200 oz-in. stepping motors, Printer cable, power cable etc.